1/2" Billet 12pt Lug Nuts

Our 1/2" 12 Point Billet Aluminum Lug Nuts are manufactured from domestic 7075 material and come in polished aluminum and black anodized with a machined contrast cut.  These billet lug nuts are available in a wide range of sizes including metric and offer a great complement to your racing wheels.

Available in 1/2" short shank (.460 long x .687 O.D.) and 3/4" long shank (.710 long x .687 O.D.) versions in 1/2" thread to meet the requirements of your vehicle and brand racing wheel.  Also a wide range of spacer washers are available to get the correct fit and look you are looking for.

Our 1/2" Lug Nuts use a standard 3/4" 12 pt socket for plenty of clearance on most wheels.  Outside diameter of the base of the lug nuts and washers is 1.200 with a Shank O.D. of .687.


  • Make sure the threads on your studs are clean and not damaged in any way.
  • Antiseeze is included with all of our lug nuts.  You must use this to prevent gaulding.
  • Nuts should be started by hand to prevent cross-threading.
  • Stud threads should protrude a minimum of 1/8" out of the lug nut when fully torqued.
  • Do NOT over torque your lug nuts as this can create an unsafe situation.
  • Aluminum lug nuts are for racing applications only and not recommended for OEM / Street use.

Recommended Torque Values - using antiseeze

  • 7/16" Lug Nuts - 85 ft lbs
  • 1/2" Lug Nuts - 85 ft lbs
  • 12 mm Lug Nuts - 85 ft lbs
  • 14 mm Lug Nuts - 85 ft lbs
  • 5/8" Lug Nuts - 100 ft lbs

Drag Race Solutions is a division of Collector Tethers™.  Racers ourselves, we have seen a need for premium drag racing components while building our own cars that we feel can improve yours.


1 - 7 of 7 items
Sort By: